Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE ID
Configuration manual for the installer
Registration manual for the owner of the charging station
Mobile phone or laptop
Printed Peblar quick start guide
Full Peblar manual (optional, available online)
Follow the steps
Step 1: Connect your phone or laptop to the hostname of the charger.
Scan the QR code on the left side of the commissioning label, or
Connect to the hostname (first row on the label) and enter the WLAN password (second row on the label).
The login settings can be found in the Peblar quick start guide included in the packaging, at position (1) in the figure.
Step 2: Open the Peblar configuration page by entering the configuration page URL (third row on the commissioning label) in a web browser. The configuration screen is displayed.
Step 3: Configure the WLAN settings: select your home network in the web interface and enter its credentials. A network connection is required so that the charger can connect to EEVEE.
Step 4: Configure the installation settings: set the current limit, the connected phases and load balancing according to the electrical installation, then press Next.
Step 5: Connect the charger to the back office:
In the authorisation tab, select Managed.
Select (TBD) from the drop-down menu.
Select Save and then press Next.
Note: Peblar only supports secure WebSocket connections (wss://).
Step 6: Finish the configuration and reboot the charger.
Are you an installer? Continue with Step 7. Are you the owner of the charging station? Continue with Step 8.
Step 7 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 8 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!