Configuration requirements
Configuration package (SIM card (optional), EVSE-ID, configuration guide for the installer, registration guide for the charging station owner)
S-Series user manual
Configuration device: laptop or smartphone
Follow the steps
Step 1: Connect to the Wi-Fi network of the charging station. The network name (SSID) is the serial number of the charging station, and the password is the same as the SSID.
You can find the serial number on the label on the right side of the charging station or in the device information on its screen.
Step 2: The web interface should open automatically once you are connected. If it does not, enter 192.168.1.1 in your browser.
Step 3: Enter the default password 123456 to reach the main page.
Step 4: Open OCPP setup and enter the following:
OCPP URL:
wss://eevee-hvpq.powerfill.app/ws/CPID: the serial number of the charging station
Step 5: Open Network setup and configure one of the following:
Wi-Fi: enter the network name and password, then confirm.
4G: enter the APN, then confirm. If the charging station uses a SIM card, APN: (TBD)
Ethernet: enter an IP address or select DHCP, then confirm.
Step 6: Restart the charging station.
If you are the installer, continue to Step 7. If you are the owner of the charging station, continue to Step 8.
Step 7 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 8 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!