Configuration requirements
Contents of the configuration package
SIM card (optional)
EVSE ID
Installer requirements
USB cable (supplied with the charging station)
Laptop with a USB port
The charging station must have an Ethernet connection
Cpconfigprogram Elexon and EEVEE config file: (TBD)
Follow the steps
Step 1: Request the Cpconfig program and the EEVEE config file: (TBD)
Step 2: Connect the laptop to the charging station with the supplied USB cable.
Step 3: Once the charging station is connected, open the CpConfig program.
Step 4: Determine the USB port:
Open Device Manager and click Poorten (COM & LPT) (Ports (COM & LPT)).
Find the entry USB serial port and note its number.
Enter that number in the serial port field at the top left of the program.
Step 5: Apply the following settings:
Station name: the EVSE ID: (TBD)
Under OCPP SETTINGS:
HOST:
eevee-hvpq.powerfill.appHOST PORT:
443URL:
wss://eevee-hvpq.powerfill.app/ws/(name charging station)(path/ws/; if a secure/TLS connection option is available, switch it ON)
If the charging station uses a SIM card, the APN must be: (TBD)
Step 6: At the bottom of the page, under settings file, click load and select the EEVEE config file.
Step 7: When all steps are complete, click write at the top right, under the settings heading.
Step 8: After the charging station restarts, wait a few minutes, then check whether the connection to the EEVEE platform has been established. Contact EEVEE support: (TBD)
Step 9 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!