Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Configuration device: laptop
UTP cable
Follow the steps
Step 1: Use the online installation manual, the WEB Manager videos and the WEB Manager manual to complete the installation safely. The videos and manual also help you set up the OCPP connection.
Step 2: A local connection is required for the first configuration. Afterwards, remote access is possible. Connect via:
Ethernet: connect the laptop to the charging station with an Ethernet cable and open
http://serialnumber.local:8080/, replacing "serialnumber" with the serial number of the charging station (for examplehttp://6S0A182A0001.local:8080). Log in with the credentials in the documentation you received with the charging station. If the browser does not accept this address, usehttp://192.168.1.33:8080instead.WiFi: connect to the network created by the charging station; the network name is equal to the serial number. The password consists of the first 8 digits of the password supplied with the charging station. Then open
http://192.168.2.1:8080orhttp://SerialNumber.local:8080.
In both cases, follow the INGEREV WEB Manager instructions.
Step 3: Go to ChargingPlants → SerialNumber → Network and click Edit in the WAN column.
Step 4: If the charging station uses a SIM card, set the APN: (TBD)
Make sure "discover APN" is unchecked.
Step 5: Open OCPP Settings and click General Settings.
Step 6: Select OCPP version 1.6 and enter the server URL wss://eevee-hvpq.powerfill.app/ws/. Then click Save & Apply.
Make sure there are no spaces before or after the URL, otherwise the charging station will not connect.
Step 7: Go to Charge Points, select your serial number and click Status.
Step 8: The status page of the charging station shows whether the OCPP connection has been established.
If you are the installer, continue with Step 9. If you are the owner, continue with Step 10.
Step 9 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 10 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!