Skip to main content

How to Control Devices (Garage Doors, Thermostats, Locks)

Learn how to control your connected devices such as garage doors, thermostats, and locks with the Qolsys IQ4.

Written by Ivan Lara

Device Control

Your panel allows you to control various devices directly from its screen. To do this, just swipe right on your screen until the corresponding device is shown. Follow the instructions below to operate these different devices. If you have more than one of each device, swipe up and down to access each individually.

Door Locks

Lock Screen

ON/OFF

ON/OFF

Touch the key icon to unlock or lock it.

Change Locks

Change Locks

If you have more than one lock, swipe up and down to access each one

Get Status

Get Status

Touch to unlock all your locks at once

UNLOCK ALL

UNLOCK ALL

Touch to unlock all your locks at once

LOCK ALL

LOCK ALL

Touch to lock all your locks at once

Garage Door Controller

Image of Qolsys Garage Door screen

Open/Close

Open/Close

Touch the icon to open or close the garage door.

Switch

Switch

If you have more than one garage door, swipe up and down to access each one.

Open All

Open All
Touch the icon to open the garage door (not available when the garage door is already closed)

Open All

Close All
Touch the icon to close the garage door (not available when the garage door is already closed)

Thermostats


Tempature

Up/Down

Touch the arrows to adjust the target temperature.

Switch

Switch

If you have more than one thermostat, swipe up and down to access each one.

Fan

Fan

Touch to change to “On” or “Automatic”.

Mode

Mode

Touch to change this thermostat from heat to cool (or off) or use “automatic” which switches from heat to cool as needed to maintain your target temperature.

Heat/Cool/Auto/Off

Battery

Battery Level

Displays how much battery is left in your thermostat.

Current Tempature

Current Temp

Displays the current temperature in your home.

Did this answer your question?