When the battery is low a signal will be send to the control panel, or when a button is pressed the LED will appear dim or will not turn on at all. Follow these simple steps to replace the battery
What You Need:
CR2032 coin battery
Flat head screwdriver
Instructions:
With a key or small screwdriver, push up on the black tab located at the bottom of the remote (fig.1) and slide the chrome trim off.
Carefully separate the front and back piece of plastic to reveal the battery.
Replace with a CR2032 battery ensuring the + side of the battery faces up (fig.2).
Re-assemble the plastics and ensure they click together.
Ensure the notch in the chrome trim is aligned with the back of the plastic. It will only go on one way. (fig.3)
|  |
|
Figure 1 | Figure 2 | Figure 3 |
